Renew your garage in 2 steps: i) garage wall

Share Project
Downloads

Shopping List

Step-by-step

Renew your garage in 2 steps: i) garage wall

Project overview

Your garage is a space that is so often utilised but very much unloved. Refreshing a garage doesn’t have to break the bank or take up much of your time. With low-cost simple techniques and the right tools, you can transform your whole garage into a workshop or the entertainment room you’ve always wanted.

  • Difficulty: Medium
  • Estimated time: 2 days
  • People power: 2
  • Budget: Medium

Step-by-step

STEP 1: Preparing your brushes

If you’re using water-based paint soak your brush in an inch of water for 10-15min, then remove and spin in between your hands to remove excess water. If you’re using oil-based paint, follow the same steps using turps.

STEP 2: Preparing your roller covers

Whether you’re using water-based or oil-based paints, rinse your roller covers in running water and run your hand up and down the roller to get rid of excess lint. Shake the roller. Attach the roller to the frame and spin it quickly off a wall or other flat surface to remove the extra water.

Back | Next   Page 1 of 3

STEP 3: Prepare your garage wall

For any paint job, preparation is critical. Fill any cracks with gap filler and sand down your garage wall, then dust and wash down to get that perfect smooth surface to start painting.

STEP 4: Apply first coat

Cut in your wall first with a 50mm Monarch Cutting In & Framing brush. When painting a textured wall, it’s preferred to roll with a 270mm Monarch Rough & Textured Surfaces roller cover to get ideal coverage. It’s vital to use a quality brush and quality roller so there are no brush or roller marks all over your garage wall.

Back | Next   Page 2 of 3

STEP 5: Apply second coat

Repeat the process while painting the second coat to bring more brightness to your chosen colour.

STEP 6: Finishing up

Congratulations, you’re done! Scrape any leftover paint back into the tin for re-use. Wash your brushes and rollers thoroughly so you can use them for your next project.

Back | Next   Page 3 of 3

Search

x